As a homeowner, you know that home repairs and maintenance can be expensive. However, there are some repairs that you can do yourself, without the need for professional help. Not only can DIY repairs save you money, but they can also give you a sense of accomplishment and pride in your home. In this post, we’ll share 5 DIY home repair tips that could save you hundreds of rupees in India.
1.Fixing a leaky faucet
A leaky faucet is not only annoying, but it can also waste a lot of water over time. Fortunately, fixing a leaky faucet is a relatively easy DIY repair. First, turn off the water supply to the faucet. Then, remove the handle and the nut underneath. Next, replace the washer or the O-ring, which are usually the cause of the leak. Finally, reassemble the faucet and turn the water supply back on.
2.Unclogging a drain
Clogged drains can be a common problem in many households. Instead of calling a plumber, try using a plunger or a drain snake to unclog the drain. If the clog is particularly stubborn, you can also try using a mixture of baking soda and vinegar, followed by hot water.
3.Fixing a running toilet
A running toilet can waste a lot of water and increase your water bill. To fix a running toilet, remove the lid from the tank and check the chain that connects the flapper to the handle. If the chain is too long or too short, adjust it accordingly. If the flapper is worn or damaged, replace it. Finally, adjust the water level in the tank to the correct level.
4.Patching a hole in the wall
Small holes in the wall can be easily patched with spackle or drywall compound. First, clean the area around the hole and apply the spackle or compound with a putty knife. Smooth out the surface and let it dry. Once dry, sand the surface and apply a second coat if necessary. Finally, paint over the patch to match the rest of the wall.
5.Fixing electrical outlets and switches
Faulty electrical outlets and switches can be dangerous and should be addressed immediately. Before starting any repairs, make sure to turn off the power supply to the outlet or switch. Then, remove the cover plate and inspect the wiring. If the wiring is loose or damaged, tighten or replace it. If you’re not comfortable working with electrical components, it’s best to call in a professional.
